Product features:

l Air head access (can be installed at the top or bottom for easy adjustment according to project requirements)

l 7 inch industrial screen, resolution: 1024*600

l Multiple input signals are optional (VGA/AHD/AV/ dual-channel AV/ four-channel AV)

l Support PTZ control

l Support the capture function is optional

Key decision:

1, 2, 3, PRESET, CALL, OPEN, CLOSE, AUX, FN.

Using the standard PELCO-D protocol, the Porte rate has 2400/9600 factory default 9600. Address code :001

Switching mode:

If you hold down the call key for 3S, the buzzer will play a prompt tone of 2400. If you hold down the call key for 3S, the buzzer will play a prompt tone of 9600.

Two-color light 9600 red, 2400 blue

Press and hold the OPEN key for 3S to mute, then press and hold again to unmute.

The indicator on P2.7 is 9600, and the indicator on P2.6 is 2400

The value of 1/2/3 can be set to 1/2/3/ 11/12/13, 21/22/23, 31/32/33

Setting: Preset point setting Press frequently to clear the combination of preset points and numeric keys

Call: Preset point call and numeric key combination work

Special Features:

AUX: Press the command to issue PRESET 51, and then the command AUX to issue CALL 51

1+AUX: PRESET 52,

2+AUX: Extended command: FF 01 00 09 00 02 XX

Once again 2+AUX FF 01 00 0B 00 02 XX

3+AUX: command to CALL 81

11+AUX: command to CALL 53

12+AUX: command to CALL 91

13+AUX: command to CALL 90